PORTS AND PROTOCOLS

PORTS AND PROTOCOLS
Table of Contents
Information............................................................................................................... 2
Contributors.............................................................................................................................................4
3.1 Introduction.......................................................................................................................................5
3.2 Basic concepts of networks.............................................................................................................6
3.2.1 Devices ......................................................................................................................................6
3.2.2 Topologies .................................................................................................................................6
3.3 TCP/IP model.................................................................................................................................. 7
3.3.1 Introduction ...............................................................................................................................7
3.3.2 Layers .........................................................................................................................................7
3.3.2.1 Application .......................................................................................................................7
3.3.2.2 Transport............................................................................................................................7
3.3.2.3 Internet ..............................................................................................................................8
3.3.2.4 Network Access.................................................................................................................8
3.3.3 Protocols ....................................................................................................................................8
3.3.3.1 Application layer protocols ............................................................................................9
3.3.3.2 Transport layer Protocols ................................................................................................9
3.3.3.3 Internet layer Protocols ................................................................................................... 9
3.3.4 IP Addresses ...............................................................................................................................9
3.3.5 Ports .........................................................................................................................................12
3.3.6 Encapsulation ..........................................................................................................................13
3.4 Exercises...........................................................................................................................................14
3.4.1 Exercise 1: Netstat ...................................................................................................................14
3.4.2 Exercise 2: Ports and Protocols ..............................................................................................15
3.4.3 Exercise 3: My First Server ....................................................................................................... 15
Further Reading....................................................................................................................................17
3
LESSON 3 – PORTS AND PROTOCOLS
Contributors
Gary Axten, ISECOM
La Salle URL Barcelona
Kim Truett, ISECOM
Chuck Truett, ISECOM
Marta Barceló, ISECOM
Pete Herzog, ISECOM
4
LESSON 3 – PORTS AND PROTOCOLS
3.1 Introduction
The text and exercises in this lesson try to impart a basic understanding of the ports and
protocols in current use, as well as their relevance within the operating systems, Windows and
Linux.
Additionally, you will have the opportunity to become familiar with a number of useful utilities
which will allow you to properly understand the network capabilities of your computer system.
At the end of the lesson you should have a basic knowledge of:
- the concepts of networks
- IP addresses
- ports and protocols.
5
LESSON 3 – PORTS AND PROTOCOLS
3.2 Basic concepts of networks
3.2.1 Devices
In order to understand the explanation of protocols and ports, it is necessary for you to
become familiar with the icons that represent the most common devices that are seen in the
basic schemes. These are:
3.2.2 Topologies
With these devices, local area networks (or LANs) can be created. In a LAN, computers can
share resources, such as hard drives, printers and internet connections, and an administrator
can control how these resources are shared. When a LAN is being designed, it is possible to
choose any of the following physical topologies:
In a bus topology, all the computers are connected to a single means of transmission, and
each computer can communicate directly with any of the others. In the ring configuration,
each computer is connected to the following one, and the last one to the first, and each
computer can only communicate directly with the two adjacent computers. In the star
topology, none of the computers are directly connected with others. Instead they are
connected through a central point and the device at that central point is responsible for
relaying information from computer to computer. If several central points are connected to
each other, an extended star topology is obtained. In a star or extended star topology, all the
central points are peers, that is, each exchanges information on an equal basis. However, if
you connect two star or extended star networks together using a central point which controls
or limits the exchange of information between the two networks, then you have created a
single, hierarchical network topology.
6
LESSON 3 – PORTS AND PROTOCOLS
Bus Ring Star Extended
Star Hierarchic
3.3 TCP/IP model
3.3.1 Introduction
TCP/IP was developed by the DoD (Department of Defense) of the United States and DARPA
(Defense Advanced Research Project Agency) in the 1970s. TCP/IP was designed to be an
open standard that anyone could use to connect computers together and exchange
information between them. Ultimately, it became the basis for the Internet.
3.3.2 Layers
The TCP/IP model defines four totally independent layers into which it divides the process of
communication between two devices. The layers through which it passes information
between two devices are:
3.3.2.1 Application
The application layer is the layer nearest the end user. This is the layer that is in charge of
translating data from applications into information that can be sent through the network.
The basic functions of this layer are:
- Representation
- Codification
- Dialog Control
- Application Management
3.3.2.2 Transport
The transport layer establishes, maintains and finishes virtual circuits for information transfer. It
provides control mechanisms for data flow and allows broadcasting, and it provides
mechanisms for the detection and correction of errors. The information that arrives at this
layer from the application layer is divided into different segments. Information that comes to
the transport layer from the internet layer is delivered back to the application layer through
ports. (See Section 3.3.5 Ports for details on ports.)
7
LESSON 3 – PORTS AND PROTOCOLS
The basic functions of this layer are:
- Reliability
- Flow Control
- Error Correction
- Broadcasting
3.3.2.3 Internet
This layer divides the segments of the transport layer into packets and sends the packets
across the networks that make up the Internet. It uses IP, or internet protocol addresses to
determine the location of the recipient device. It does not ensure reliability in the
connections, because this is already taken care of by the transport layer, but it is responsible
for selecting the best route between the originating device and the recipient device.
3.3.2.4 Network Access
This layer is in charge of sending information at both the LAN level and the physical level. It
transforms all the information that arrives from the superior layers into basic information (bits)
and directs it to the proper location. At this level, the destination of the information is
determined by the MAC, or media access control, address of the recipient device.
3.3.3 Protocols
To be able to send information between two devices, both must speak the same language.
This language is called the protocol.
The protocols that appear in the application layer of the TCP/IP model are:
- File Transfer Protocol (FTP)
- Hypertext Transfer Protocol (HTTP)
- Simple Mail Transfer Protocol (smtp)
- Domain Name Service (DNS)
- Trivial File Transfer Protocol (TFTP)
The protocols of the transport layer are:
- Transport Control Protocol (TCP)
- User Datagram Protocol (UDP)
The protocols of the internet layer are:
- Internet Protocol (IP)
The protocol most often used in the network access layer is:
- Ethernet
The protocols listed above and their associated ports will be described in the following
sections.
8
LESSON 3 – PORTS AND PROTOCOLS
3.3.3.1 Application layer protocols
FTP or file transfer protocol is used for the transmission of files between two devices. It uses TCP
to create a virtual connection for the control of information, then creates another connection
to be used for the delivery of data. The most commonly used ports are 20 and 21.
HTTP or hypertext transfer protocol is used to translate information into web pages. This
information is distributed in a manner similar to that used for electronic mail. The most
commonly used port is 80.
SMTP or simple mail transfer protocol is a mail service that is based on the FTP model. It
transfers electronic mail between two systems and provides notifications of incoming mail. The
most commonly used port is 25.
DNS or domain name service provides a means to associate a domain name with an ip
address. The most commonly used port is 53.
TFTP or trivial file transfer protocol has the same functions as FTP but uses UDP instead of TCP.
(See Section 3.3.3.2 for details on the differences between UDP and TCP.) This gives it more
speed, but less security and trustworthiness. The most commonly used port is 69.
3.3.3.2 Transport layer Protocols
There are two protocols which can be used by the transport layer to deliver information
segments.
TCP or transmission control protocol establishes a logical connection between the final points
of the network. It synchronizes and regulates the traffic with what is known as the "Three Way
Handshake". In the “Three Way Handshake,” the originating device sends an initial packet
called a SYN to the recipient device. The recipient device sends an acknowledgment
packet, called a SYN/ACK. The originating device then sends a packet called an ACK, which
is an acknowledgment of the acknowledgment. At this point, both the originating device
and the recipient device have established that there is a connection between the two and
both are ready to send and receive data to and from each other.
UDP or user datagram protocol is a transport protocol which is not based on a connection. In
this case, the originating device sends packets without warning the recipient device to
expect these packets. It is then up to the recipient device to determine whether or not those
packets will be accepted. As a result, UDP is faster that TCP, but it cannot guarantee that a
packet will be accepted.
3.3.3.3 Internet layer Protocols
IP or internet protocol serves as a universal protocol to allow any two computers to
communicate through any network at any time. Like UDP, it is connectionless, because it does
not establish a connection with the remote computer. Instead, it is what is known as a best
effort service, in that it will do whatever is possible to ensure that it works correctly, but its
reliability is not guaranteed. The Internet Protocol determines the format for the packet
headers, including the IP addresses of both the originating and the recipient devices.
3.3.4 IP Addresses
A domain name is the web address that you normally type into a web browser. That name
identifies one or more IP addresses. For example, the domain name microsoft.com represents
about a dozen IP addresses. Domain names are used in URLs to identify particular Web pages.
9
LESSON 3 – PORTS AND PROTOCOLS
For example, in the URL http://www.pcwebopedia.com/index.html, the domain name is
pcwebopedia.com.
Every domain name has a suffix that indicates which top level domain (TLD) it belongs to.
There are only a limited number of such domains. For example:
.gov - Government agencies
.edu - Educational institutions
.org - Organizations (nonprofit)
.com - Commercial Business
.net - Network organizations
Because the Internet is based on IP addresses, not domain names, every Web server requires
a Domain Name System (DNS) server to translate domain names into IP addresses.
IP Addresses are the identifiers that are used to differentiate between computers and other
devices that are connected to a network. Each device must have a different IP address, so
that there are no problems of mistaken identity within the network. IP addresses consist of 32
bits that are divided in four 8 bit octets which are separated by dots. Part of the IP address
identifies the network, and the remainder of the IP address identifies the individual computers
on the network.
There are both public and private IP addresses. Private IP addresses are used by private
networks that have no connection with outside networks. IP addresses within a private
network should not be duplicated within that network, but computers on two different – but
unconnected – private networks could have duplicated IP addresses. The IP addresses that
are defined by IANA, the Internet Assigned Numbers Authority, as being available for private
networks are:
10.0.0.0 through 10.255.255.255
172.16.0.0 through 172.31.255.255
192.168.0.0. through 192.168.255.255
IP addresses are divided into classes based on what portion of the address is used to identify
the network and what portion is used to identify the individual computers.
Depending on the size assigned to each part, more devices will be allowed within the
network, or more networks will be allowed. The existing classes are:
10
LESSON 3 – PORTS AND PROTOCOLS
- Class A: The first bit is always zero, so this class includes the addresses between 0.0.0.0
and 126.255.255.255. Note: the addresses of 127.x.x.x are reserved for the services of
loopback or localhost.
- Class B: The first two bits of the first octet are '10', so this class includes the addresses
between 128.0.0.0 and 191.255.255.255.
- Class C: The first three bits of the first octet are '110', so this class includes the
addresses between 192.0.0.0 and 223.255.255.255.
- Class D: The first four bits of the first octet are '1110', so this class includes the
addresses between 224.0.0.0 and 239.255.255.255. These addresses are reserved for
group multicast implementations.
- The remaining addresses are used for experimentation or for possible future
allocations.
At this time, the classes are not used to differentiate between the part of the address used to
identify the network and the part used to identify the individual devices. Instead, a mask is
used. In the mask, a '1' binary bit represents the part containing the network identification and
a '0' binary bit represents the part that identifies the individual devices. Therefore, to identify a
device, in addition to the IP address, it is necessary to specify a network mask:
IP: 172.16.1.20
Mask: 255.255.255.0
IP addresses 127.x.x.x are reserved to be used as loopback or local host addresses, that is,
they refer directly back to the local computer. Every computer has a local host address of
127.0.0.1, therefore that address cannot be used to identify different devices. There are also
other addresses that cannot be used. These are the network address and the broadcast
address.
The network address is an address in which the part of the address which normally identifies
the device is all zeros. This address cannot be used, because it identifies a network and can
never be used to identify a specific device.
IP: 172.16.1.0
Mask: 255.255.255.0
11
LESSON 3 – PORTS AND PROTOCOLS
The broadcast address is an address in which the part of the address which normally identifies
the device is all ones. This address cannot be used to identify a specific device, because it is
the address that is used to send information to all of the computers that belong to the
specified network.
IP: 172.16.1.255
Mask: 255.255.255.0
3.3.5 Ports
Both TCP and UDP use ports to exchange information with applications. A port is an extension
of an address, similar to adding an apartment or room number to a street address. A letter
with a street address will arrive at the correct apartment building, but without the apartment
number, it will not be delivered to the correct recipient. Ports work in much the same way. A
packet can be delivered to the correct IP address, but without the associated port, there is
no way to determine which application should act on the packet.
Once the ports have been defined, it is possible for the different types of information that are
sent to one IP address to then be sent to the appropriate applications. By using ports, a
service running on a remote computer can determine what type of information a local client
is requesting, can determine the protocol needed to send that information, and maintain
simultaneous communication with a number of different clients.
For example, if a local computer attempts to connect to the website www.osstmm.org,
whose IP address is 62.80.122.203, with a web server running on port 80, the local computer
would connect to the remote computer using the socket address :
62.80.122.203:80
In order to maintain a level of standardization among the most commonly used ports, IANA
has established that the ports numbered from 0 to 1024 are to be used for common services.
The remaining ports – up through 65535 – are used for dynamic allocations or particular
services.
The most commonly used ports – as assigned by the IANA – are listed here:
Port Assignments
Decimals Keywords Description
0 Reserved
1-4 Unassigned
5 rje Remote Job Entry
7 echo Echo
9 discard Discard
11 systat Active Users
13 daytime Daytime
15 netstat Who is Up or NETSTAT
17 qotd Quote of the Day
19 chargen Character Generator
20 ftp-data File Transfer [Default Data]
21 ftp File Transfer [Control]
22 ssh SSH Remote Login Protocol
12
LESSON 3 – PORTS AND PROTOCOLS
Port Assignments
Decimals Keywords Description
23 telnet Telnet
25 smtp Simple Mail Transfer
37 time Time
39 rlp Resource Location Protocol
42 nameserver Host Name Server
43 nicname Who Is
53 domain Domain Name Server
67 bootps Bootstrap Protocol Server
68 bootpc Bootstrap Protocol Client
69 tftp Trivial File Transfer
70 gopher Gopher
75 any private dial out service
77 any private RJE service
79 finger Finger
80 www-http World Wide Web HTTP
95 supdup SUPDUP
101 hostname NIC Host Name Server
102 iso-tsap ISO-TSAP Class 0
110 pop3 Post Office Protocol - Version 3
113 auth Authentication Service
117 uucp-path UUCP Path Service
119 nntp Network News Transfer Protocol
123 ntp Network Time Protocol
137 netbios-ns NETBIOS Name Service
138 netbios-dgm NETBIOS Datagram Service
139 netbios-ssn NETBIOS Session Service
140-159 Unassigned
160-223 Reserved
You can also refer to the Web page: http://www.isecom.info/cgilocal/
protocoldb/browse.dsp for more detailed information on ports.
3.3.6 Encapsulation
When a piece of information – an e-mail message, for example – is sent from one computer to
another, it is subject to a series of transformations. The application layer generates the data,
which is then sent to the transport layer. The transport layer takes this information and adds a
header to it. This header contains information, such as the IP addresses of the originating and
recipient computers, that explains what must be done to the data in order to get it to the
appropriate destination. The next layer adds yet another header, and so on. This recursive
procedure is known as encapsulation.
Each layer after the first makes its data an encapsulation of the previous layer's data, until you
arrive at the final layer, in which the actual transmission of data occurs. The following figure
explains encapsulation in a graphic form:
13
LESSON 3 – PORTS AND PROTOCOLS
When the encapsulated information arrives at its destination, it must then be deencapsulated.
As each layer receives information from the previous layer, it removes the
unneeded information contained in the header placed there by the previous layer.
3.4 Exercises
3.4.1 Exercise 1: Netstat
Netstat
The Netstat command allows you to see the state of the ports on a computer. In order to
execute it, you must open an MS-DOS window and type:
netstat
In the MS-DOS window, you will then see a list of the established connections. If you want to
see the connections displayed in numeric form, type:
netstat - n
To see the connections and the active ports, type:
netstat - an
To see a list of other options, type:
netstat - h
In the Netstat output, the second and third columns list the local and remote IP addresses
being used by the active ports. Why are the addresses of the remote ports different from the
local addresses?
Next, using a web browser, open this web page:
http://193.145.85.202
then return to the MS-DOS prompt and run Netstat again. What new connection (or
connections) appear?
Open another web browser and go to this web page:
http://193.145.85.203
Return to the MS-DOS prompt and run Netstat:
14
LESSON 3 – PORTS AND PROTOCOLS
DATA
SEGMENT
PACKET
FRAME
- Why does the protocol HTTP appear in several lines?
- What differences exist between each one of them?
- If there are several web browsers open, how does the computer know which information
goes to which browser?
3.4.2 Exercise 2: Ports and Protocols
In this lesson, you learned that ports are used to differentiate between services.
Why is it that when a web browser is used, no port is specified?
What protocols are used?
Is it possible that one protocol gets used in more than one instance?
3.4.3 Exercise 3: My First Server
To perform this exercise, you must have the Netcat program. If you do not have it, you can
download it from the page:
http://www.atstake.com/research/tools/network_utilities/
Once you have Netcat installed, open an MS-DOS window. Change to the Netcat directory
and type:
nc - h
This displays the options that are available in Netcat. To create a simple server, type:
nc - l - p 1234
When this command executes, port 1234 is opened and incoming connections are allowed.
Open a second MS-DOS window and type:
netstat – a
This should verify that there is a new service listening on port 1234. Close this MS-DOS window.
To be able to say that a server has been implemented, you must establish a client association.
Open an MS-DOS window and type:
nc localhost 1234
With this command, a connection is made with the server that is listening to port 1234. Now,
anything that is written in either of the two open MS-DOS windows can be seen in the other
window.
Create a file named 'test', that contains the text, “Welcome to the Hacker Highschool server!”
In an MS-DOS window, type:
nc - l - p 1234 > test
From another MS-DOS window, connect to the server by typing:
nc localhost 1234
When the client connects to the server, you should see the output of the file, 'test'.
To close the service, switch to the MS-DOS window in which it is running and press CTRL-C.
What protocol has been used to connect with the server?
15
LESSON 3 – PORTS AND PROTOCOLS
Does Netcat allow you to change this? If so, how?
16
LESSON 3 – PORTS AND PROTOCOLS
Further Reading
You can find more information on ports and protocols by looking at the following links:
http://www.oreilly.com/catalog/fire2/chapter/ch13.html
http://www.oreilly.com/catalog/puis3/chapter/ch11.pdf
http://www.oreilly.com/catalog/ipv6ess/chapter/ch02.pdf
http://info.acm.org/crossroads/xrds1-1/tcpjmy.html
http://www.garykessler.net/library/tcpip.html
http://www.cisco.com/univercd/cc/td/doc/cisintwk/ito_doc/ip.htm
http://www.redbooks.ibm.com/redbooks/GG243376.html
Port Number references:
http://www.iana.org/assignments/port-numbers
http://www.isecom.info/cgi-local/protocoldb/browse.dsp
17
LESSON 3 – PORTS AND PROTOCOLS